Industrial Floor Scale - 3000kg, 150 cm W x 150 cm L - Digital - Low Profile

The wire that connects the digital display and the platform of the scale is included. If you purchased a scale and did not receive the wire please contact our customer support team immediately and provide your invoice number.

This digital floor scale will be the best option out of all the floor scales we offer. It is only 3/4" smaller than the 4' x 4' you are looking for but should certainly get the job done. This floor scale will be able to weigh in pounds and kilograms in increments of 1. You can switch between pounds and kilograms with a touch of a button. Set up and installation are a breeze for these scales as well.

The scale has the CE certification mark that indicates it conforms with the health, safety, and environmental protection standards for products sold within the European Economic Area.

The height of the scale is roughly 10 CM high. The floor scale also weighs about 85 KG.

Our floor scale does not come with calibration certificate, but we always calibrate them before they leave our factory. There are instructions for calibration in the manual, you may simply follow the procedure to calibrate if you needed.

The temperature rating for this scale is -20°C to 50°C. The scale its self can certainly be outside, however, the digital reader is not weatherproof so its better to use in an indoor setting.

This specific scale does not have a function to record data in this manner. It does have a RS232 serial port that can be used to connect the scale to a printer.

The height of the scale is approximately 10 cm which is just under 4" tall. We do not recommend leaving anything on the platform of the scale when it is not in use as it may cause inaccurate readings.

The digital display is designed to be installed on a bracket that is screwed onto the platform of the scale. However, in theory you could put the display on a post off the platform but the problem you will run into is that the cable length. The cable provided will not be long enough as the display is suppose to be on the platform. We do not sell longer cables.

The scale has its own battery inside that gets charged when it is plugged in. You cannot connect additional battery sources, but on a full charge it will last up to 3 hours so that you can move the scale to an area where you want to use it. It does have a long cord, but perhaps another workaround is to plug it into a generator.

Yes, you can store a liquid nitrogen tank on the industrial floor scale. It is advisable to keep the scale turned off while you are storing it.

The Industrial Floor Scale (D1141884) and all Deelat scales are IP65 rated, which means that they are protected against water and oil exposure. A small amount of oil will not damage the scale. However, please don't submerge the scale in water or oil.

The floor scale comes with a 180 day warranty. The floor scale reads in individual measurements, either lbs of KG.

The majority of our floor scales are in stock and ready for immediate shipment. Please call our toll-free customer support for exact transit times to your delivery address.

The floor scale does not meet Class 1 Div 1 requirements. Our floor scales only have CE and UL certifications.

Yes the reader can be moved. The reader comes with a bracket that can be installed onto the scale or on a wall or any flat surface. The cable provided that connects the reader to scale is 1.5 meters long.

Yes, you can weigh large horses on our industrial floor scales, as long as they are within the weight and size limits of each product.

The industrial floor scale can give accurate readings in an outside environment for a short period of time, but if kept outside for a longer time frame, the environment might make the readings a little less accurate.