Leaky faucets are a common problem in bathrooms and kitchens. To fix it, your first instinct might be to call a plumber. However, with a few tools and supplies, you may be able to correct the problem yourself. Follow these simple tips to help you find the source of the problem and potentially make repairs.
Prepping Steps
Before starting to remove things, there are a few safety or precautionary steps you should take.
1. Turn off the water by shutting off both the hot and cold water valves under the sink. No tools are needed, simply twist and turn.
2. Make sure your drain line is completely empty before proceeding.
3. For added safety, protect your drain by covering it with a paper towel.
4. Cover your floor with an old sheet to protect it from scratches, rips or tears.
5. Fill an old bucket or bowl with hot water and several capfuls of white vinegar to use for cleaning faucet parts.
6. When you take the faucet apart, line the parts in the same order for reinstallation later. You may also want to take several photos with your phone as you disassemble the faucet for added assistance.
7. Take the parts that require replacing to the store with you to ensure the proper size is purchased.
What is the Problem?
Next you’ll need to figure out the problem. Most often it will be one of the following issues:
- Stripped rubber washers (compression faucets).
- Broken neoprene seal (washerless faucets).
- Broken o-ring/seal (washerless faucets).
- Worn ceramic plate (lever operated faucets).
Easy Repair Steps
Once you have disassembled the faucet.
1. Remove the cap.
2. Take out the cartridge or disc to get to the seal.
3. Remove the seal or o-ring and examine. If in good condition, clean and replace. If not, run to the store for a replacement.
4. Once repaired, reassemble the faucet, turn the water back on, and test to see if the leak has stopped.
To keep it simple, you may opt to replace all parts or even replace your entire faucet (a wise decision if you have a ball faucet but less necessary if you have a compression one). If you choose not to, be sure to clean each part really well before replacing it. Dip the parts in your hot water and vinegar solution, and scrub with a scouring pad to remove build up. Rinse with water and dry as necessary.
Deelat Industrial is your source for plumbing supplies. Whether you require parts to fix a leak, or for kitchen or bathroom renovation projects, Deelat have you covered. Shop with us today and save!










